Prototype putters galore at the Cognizant Classic | Tour Report

Welcome to Fully Equipped’s weekly Tour equipment report. Every Friday of PGA Tour weeks (plus other times, if news warrants), GOLF equipment editor Jack Hirsh runs you through some of the biggest news surrounding golf clubs on Tour, including changes, tweaks and launches.

As the PGA Tour’s Florida Swing kicked off at PGA National, many of the game’s top pros were taking a week off before next week’s Arnold Palmer Invitational. But that didn’t stop companies from bombarding us with putter prototypes.

If you’re a fan of low-torque (also known as zero-torque) putters, this week was sure to get you excited.

First up is the Tour launch of the new L.A.B. Link 2.1 and 2.2, the next generation of the Link 1, currently L.A.B.’s only blade in their matrix.

Slide 1

1/4

2/4

3/4

4/4

The 2.1 is a more traditional modern blade shape, while the 2.2 is a shorter heel-to-toe wide-body blade. But the interesting thing is that both putters have L.A.B.’s new HS riser hosel introduced on the OZ.1i HS last summer.

Additionally, they have a new deep-flymilled face. I would be super interested in this, as all the L.A.B. faces thus far have been either too soft or too firm for me.

But L.A.B. wasn’t the only company offering up new heel-shafted, low-torque options. Bettinardi launched a few new “Hexpiramental” Prototypes at the Cogninzant Classic, and each appeared to have a new low-torque hosel from the company.

Bettinardi currently has four shapes in its Antidote low-torque line, and all are center-shafted. But it seems like the company has come up with a new hosel that looks more like a traditional long plumber’s neck, but with the shaft oriented toward the center of the putter.

It seems like a very similar concept to L.A.B.’s riser hosel or Odyssey’s S2S Tri-Hot SB that Max Greyserman is using, where the axis point of the shaft is raised so it aligns with the CG of the putter to give it toe-up properties.

Bettinardi’s take on it looks about as traditional as an attempt as we’ve seen yet.

So far, we’ve seen only two shapes: a high-toe wide-body blade SS9 and a new mid-mallet option similar to an Odyssey Jailbird or Scotty Cameron Fastback with a window in the back.

But it also looks like there are tons of options for face milling already, with photos showing Bettinardi’s new VFT milling pattern and the FIT face currently on their Antidote line.

Lastly, Scotty Cameron also unveiled a new prototype to pros this week with a new T12 mallet.

We don’t know much about this one, and you’ll have to check out the photos on GolfWRX for yourself, but we’ll address the elephant in the room and acknowledge it’s pretty clear what kind of look and performance Cameron is going after here. But before anyone starts throwing accusations around, know that pretty much every OEM has putters and tech that look exactly like another’s. People like what does well, so there’s no sense in trying to make things that are radically different from what is working.

What’s interesting here is that the last time we saw a Scotty “12” mallet in the Phantom X line, it too had gaps between the wings and the center of the putter. But that putter seemed larger and more focused on delivering ultra-high MOI.

We have no idea when this could be coming out because we still haven’t heard any details about the T3 mallets (the one Ryan Gerard is gaming) that have been out since last summer! I wouldn’t expect anything soon, as the T12 we saw on GolfWRX doesn’t appear to have the new SCS insert or chain-link face milling that the rest of the 2026 Phantom line has.

Two works of art go into play

While all those new prototypes look awesome, the only new prototype putters that actually went into play this week were two Odyssey Damascus Milled No. 7s.

Yes, you read that right! Damascus!

Damascus steel is one of those materials that’s typically used in high-end boutique putters to give them a one-of-one look. The material is usually based on carbon steel and then welded, folded or forged together to create a unique look only that piece has.

It’s more considered art than a piece of performance material, but both Chris Kirk and Kevin Yu put the new Odyssey Damascus wands in the bag this week at the Cognizant. Kirk played a single-bend version, while Yu had one with a Crank Hosel.

Check this out

This section is dedicated to cool photos we’ve snapped recently on Tour, but haven’t had a reason to share yet. For this week, check out Joel Dahmen’s Ping Anser hybrid, still kicking in his bag more than 14 years after its release.

Joel Dahmen hybrid. — Joel Dahmen’s Anser hybrid might never leave the bag. Jack Hirsh/GOLF

Odds and Ends

Some other gear changes and notes we’re tracking this week.

Keith Mitchell added a new Scotty Cameron Kombi S (yes, new!) after testing against an original Kombi he brought from home … Matthieu Pavon has a Scottsdale Tec Ketsch Onset, the same platform as Tony Finau’s new wand and in the same configuration, just with a different headshape … Emiliano Grillo added a TaylorMade Qi4D 3-wood and TaylorMade led the fairway count with 84 … Danny Walker and Hoatong Li both added the TaylorMade R7 Quad Mini driver … Chandler Phillips added a 10.5 Qi4D driver, the 16th Qi4D driver in play this week and 17th TaylorMade driver … Brandt Snedeker, Davis Thompson and Li all got Spidered this week … Brooks Koepka is still in a Spider Tour X L-Neck, but has reportedly switched to a Titleist Pro V1x golf ball … Alejandro Totsti added a 25˚ Qi4D Rescue… Garrick Higgo added a split set of TaylorMade P7CB (4-5) and P7MB (6-PW) irons … Chris Kirk and Rasmus Hojgaard both moved into the Quantum TD Max driver.

3 things you should read/watch

A selection of GOLF content from the past week that may interest you.

Tony Finau’s new putter isn’t his only equipment tweak | Bag Spy – Take a deep dive into the bag of Tony Finau, who has made a few more tweaks than normal this season, including a brand new Ping prototype Scottsdale Tec putter.

PING G440 LST Custom Driver

The G440 driver family (MAX, LST, SFT) is optimized to deliver more ball speed through multiple advancements, including PING’s deepest CG in a driver to date and a shallower, thinner face, while continuing to ensure the game-changing forgiveness expected from a PING driver. The G440 LST (Low Spin) design appeals to players with faster swing speeds, providing lower spin and more control in 9° and 10.5° lofts with the three-position back weight. HIGHLY FORGIVING Lighter head weight allows for heavier back weight. FASTER FACE Shallow, thinner, face increases ball speed for more distance, higher launch. SOUND DESIGN New shaping, carbon crown and internal ribs produce muted impact experience. FREE-HOSEL DESIGN Saves weight to lower CG, increase forgiveness. Allows for more heel-side face flexing for consistent ball speed across face.

$619.00 from Fairway Jockey

View Product

TaylorMade Qi4D fitting with one of the best in the world – Check out Johnny’s TaylorMade Qi4D fitting with Adrian Rietveld, the fitter for Scottie Scheffler, Rory McIlroy and Tommy Fleetwood.

TaylorMade Qi4D Custom Driver

SHAPED FOR SPEED The re-engineered head profile increases ball speed thanks to improved aerodynamics developed through advanced simulations. FACE FOR DISTANCE 60x Carbon Twist Face™ is a technological cornerstone that provides weight savings, incredible ball speed and more consistency vs. a titanium face. ADJUSTABLE PERFORMANCE 4° loft sleeve can be used to adjust loft, lie and face angle for optimized flight. TOUR PROVEN TECHNOLOGIES New and improved cut-through Speed Pocket™ protects ball speed and reduces spin on low-face strikes. Advanced CAD modeling creates a design with a clean and powerful sound, a foundation of TaylorMade driver performance. Multi-Material Construction allows engineers to strategically place mass in areas of the head where it maximizes performance, speed, and stability.

$649.99 from Fairway Jockey

View Product

Bryson DeChambeau and LA Golf have split. Here’s why it didn’t work out – GOLF’s Michael Bamberger looks into where things went sour between one of the most marketable stars and one of the trendiest equipment companies.

The author welcomes your comments at Jack.Hirsh@golf.com.

Want to overhaul your bag in 2026? Find a club-fitting location near you at True Spec Golf.

The post Prototype putters galore at the Cognizant Classic | Tour Report appeared first on Golf.

Read the full article here